Track Rules
All classes with a specification motor (17.5, 21.5, & 25.5) are run as “Blinky” classes. This means no ESC timing or ramping is allowed. No exceptions. Maximum allowable voltage is 8.409 volts. Anything 8.41 volts or higher is illegal and dangerous.
Classes:
Rookie – Run what you’ve got.
21.5 Touring Car – 190mm width 4 door sedan body. Rubber TC Tires. Any ROAR Approved 21.5 turn motor and any ROAR Approved ESC with no timing or ramping, evident from the ESC's LED Blinking. ROAR spec electronics. 1320g minimum weight
17.5 Touring Car – 190mm width 4 door sedan body. Rubber TC Tires. Any ROAR Approved 17.5 turn motor and any ROAR Approved ESC with no timing or ramping, evident from the ESC's LED Blinking. ROAR spec electronics/weights apply. 1320g minimum weight
Modified Touring Car –190mm width 4 door sedan body. Rubber TC Tires. Open ESC and Motor. 1320g minimum weight
USGT – 190mm width 2 door GT body. Gravity RC USGT Spec tires must be used. Any ROAR Approved 21.5 turn motor and any ROAR Approved ESC with no timing or ramping, evident from the ESC's LED Blinking. 1350g
FWD - 190mm width realistic FWD body. Gravity RC USGT Spec tires must be used. Hobbywing fixed timing 17.5 turn motor and ESC must be used.
F1 – 190mm maximum width. Realistic F1 front suspension to be mounted within the confines of the body. Rubber Tires with purpose-made Formula 1 Rims. ROAR Approved 25.5 turn motor and electronic speed control with no timing or ramping programmed. This is evident from the ESC’s LED blinking (also referred to as blinky mode). 1020g minimum weight.
Tamiya Euro Truck – Tamiya Man Trucks only. No option parts allowed with exception of bearings. ESC from the kit must be used. Handout motors will be given out at the time of signup. Deans Connectors are legal, as well and any lubricants or greases. No traction compound on the tires is allowed.
Nitro Touring Touring Car – 200mm width, Foam tires 30mm maximum width. 0.12 (2.1cc) displacement engine maximum. 75cc maximum fuel tank.
Tamiya TT-02 – Chassis and body must be assembled per instructions, with exceptions of the radio box and motor cover (omited). Kit Motor and ESC must be used. Deans or XT60 Connector allowed. The following option parts will be allowed, bearings, pinion gear (up to 25t), hardware, servo saver/horn, steering bellcranks and rack, drive hexes, rear hub carriers, universal shafts, drive cups and prop shaft. Tires will be the Team Powers spoked-rim FWTT34H treaded tire or kit tires.
There will be a suspension to those found maliciously breaking these rules. The length of the suspension is up to determination by the race director.